151 x 129 x 100 mm

Den tyskdesignede Fluval Reef 4.0 LED oplyser ikke bare dit saltvandsakvarium, den transformerer det. Med sit kritiske aktiniske spektrum giver dette fuldspektrede belysningssystem dine koraller præcis det, de har brug for til at fotosyntetisere, vokse og vise deres mest levende farver. Bedst af alt? Du kan styre det hele fra din smartphone. Med FluvalConnect-appen har du kontrol over uafhængige farvekanaler, 24-timers lyscyklusser og endda specialeffekter. Du kan vælge mellem flere forudindstillede miljøer eller skabe din egen perfekte undervandsverden. Reef 4.0 LED er bygget til at holde og har avanceret IP67-beskyttelse mod vand, fugt og støv samt en glaslinse, der giver krystalklar belysning, der ikke falmer med tiden. Installationen er nem, uanset om du foretrækker udtrækkelige beslag, justerbare forhøjninger eller et ophængt display, har du muligheder for at montere lyset præcis, hvor du har brug for det. Funktioner Kraftfuld fuldspektret belysning for maksimal koralvækst, farve og sundhed Tilpassede, uafhængigt styrede farvekanaler Betjenes udelukkende via FluvalConnect mobilappen Programmerbar 24-timers lyscyklus – juster solopgang, middag, skumring og nat for at efterligne naturlige sol- og månecyklusser Forudindstillede miljøer – vælg mellem flere praktiske akvarieprofiler IP67 avanceret beskyttelse mod vand, fugt og støv med glaslinser af høj kvalitet Aluminiumslegeringsramme fordeler varmen jævnt for at forbedre belysningseffektiviteten og levetiden Udtrækkelige beslag passer til en række akvariebredder til akvariemontering Forhøjninger muliggør justerbar lodret positionering (inkluderet) Valgfrit ophængningssæt sælges separat (varenummer A20482) Designet i Tyskland. inkluderet LED-lys med 2 m ledning Udtrækkelige forhøjninger Strømforsyning

Improved dirt removal for cleaner water and darker rolls
Reduced effect on skimmer foam when first changing a new roll
Improved water resistance of centre disposable core
40m roll length – 60% longer than the original 25m rolls
Made in Europe
100% recyclable polypropylene

Do you know that on each Clarisea XL roll there is the equivalent surface area of the following number of standard filter socks.

SK3000 XL – 75 x 4″ Filter Socks

SK5000 XL – 115 x 4″ Filter socks

Cost Savings
Think how often you need to change your filter socks!

Do you wash them or change them, if so what is your time worth every 3-4 days?

Incredible but true, compare the cost of both options to yourself and you will realise why the ClariSea Fleece Filter is so popular.

It is not really correct to state a micron size for this type of filter material as it can lead to confusion.

Like all fleece filters of this type, including bag filters, the size of the particle removed by the media will continuously reduce as the fleece dirties.

Example; with a 200 micron filter sock, the largest particle that should pass through when new is 200 microns, however as the media starts to collect dirt, the holes get blocked creating smaller and smaller passages and so the bag collects out smaller and smaller particles. It continues to do this until the head pressure can no longer force water through the small holes and it overflows.

The ClariSea works in exactly the same way except that instead of overflowing and having to change or clean the bag, it automatically rolls on to expose a fresh piece of material. The fresh fleece will allow larger particles to pass through and the dirtier material will stop smaller particles.

The higher the flow rate through the fleece, the less time the roll will last.

Imagine it as a large group of people trying to leave a building through one door. The slower and more organised they try to leave, the easier it is for individuals to bunch together and to fill into small gaps in the crowd, like water and small particles finding their way through small holes in the fleece.

Compare this with people trying to leave quickly in a panic, and chaos is created, so that people back up around the door, like the water level backing up and triggering the float to move on the roll in the ClariSea without it becoming fully saturated with dirt.

The pressure to force such a large flow rate of water through such a fine fleece is created by the head height of the water in the ClariSea unit above the water level in the sump.

The higher this difference is between the two levels, the higher the head pressure, and the easier it is to force the same amount of water through smaller and smaller holes created as the fleece blocks. The perfect height would therefore be with the opening to the silencing plates being about 1-2 cm (1/2-1″) below the water surface. (On the tests for the ‘flow vs filter life’ chart, the bottom of the ClariSea was submerged 11cm below the surface).

The deeper the Clarisea sits in the water, the less head pressure exists to force water through the fleece and therefore the shorter the life of the roll.

Factors affecting the life of the fleece are/

1 – Water flow (volume)

2 – Filter installation height above the water.

3 – Dirty tank.

With most aquariums you will find that they act as large settlement chambers and that particles of food, detritus and dead bacteria settle within the sand or substrate. The clarisea will remove this detritus from the water before it gets a chance to settle but will also remove sediments from the substrate as it is stirred up by fish or manually.

The rolls in the early days may last for a shorter length of time and should be seen to last longer and longer as the tank is cleaned.

4 – Greedy fish

Tanks with high stocking loads of hungry fish will dirty the roll faster but keep your aquarium sparklingly clean whilst removing uneaten food before it breaks down.

5 – Excessive Carbon Dosing

Carbon dosing works by growing bacteria in the water column that are then exported out of the system by skimming or filtration. Excessive carbon dosing can result in bacterial blooms which are seen as a slight cloudiness of the water. The ClariSea fleece is fine enough to remove these bacteria from the water but when in high volumes will blind the fleece and reduce it’s life. If you notice this then we suggest slowly reducing the amount of carbon source added. Equally the installation of the ClariSea after a Nitrate Filter will also reduce the life and give a pale coloured roll from the white bacteria.

Features:
– App-control allows a wide range of dosing scenarios
– Flexible installation with wall bracket or stand
– Active signal LED when the pump is working
– Control panel with touch sensors
– Integration of further reefdoser EVO 1, 3 or 5 possible via App

Application examples:
– Regular dosing of liquids, e.g. trace elements and fertilizers
– Calcium and hydrogen carbonate addition in coral reef aquaria
– Addition of lime water
– Automatic feeding with live plankton

Dimensions:
reefdoser EVO 1: app. 97 x 105 x 127 mm (l x w x h)
reefdoser EVO 3: app. 197 x 105 x 127 mm (l x w x h)
reefdoser EVO 5: app. 277 x 105 x 127 mm (l x w x h)

Koral lim

hot construct er en brugervenlig lim til syntetisk materiale til hurtig og nem limning af koralfragmenter (lag). Den er fri for opløsningsmidler. Ubrugt materiale kan genaktiveres i varmt vand og genbruges. Velegnet til brug over og under vand.

Place the required amount hot construct in hot water (at least 65° C) and wait until the beads become glassy. Then take the glue out of the water (attention: material is hot) and knead to a homogeneous mass for further processing. The still soft material should be processed quickly since hot construct reaches its final solidity after cooling by approx. 60 sec. The base has to be as free as possible of deposits and algae.

Indhold: ca. 100 g

I akvarieskabe med åben filtertank kan slid og korrosion på hængslerne forårsaget af stænk og kondens næppe undgås. Ved korrekt brug forhindrer den beskyttende film påført af Rust Protect fugt i at nå metaldelene, hvilket reducerer risikoen for korrosion markant. Rust Protect har ikke harpiks og er modstandsdygtig overfor saltvand.

– saltvandsbestandig

– ingen dræning

– ingen resinificering

– slidreduktion

– korrosionsbeskyttelse

– langtidseffekt

Regelmæssig brug anbefales.

Indhold: app. 100 ml
Spray/aerosol

Sikkerhedsinstruktioner:

Fare, pas på, at ingen Rust Protect kan trænge ind i vand- og luftcirkulationen i akvariet.

Indeholder: sulfonsyrer, mineralolie og calciumsalte

Yderst brandfarlig aerosol. Beholderen er under tryk: Kan briste ved opvarmning. Kan forårsage en allergisk hudreaktion. Hvis lægehjælp er nødvendig, skal du have produktbeholder eller etiket ved hånden. Holde utilgængeligt for børn. Holdes væk fra varme, varme overflader, gnister, åben ild og andre antændelseskilder. Lad være med at ryge. Spray ikke på åben ild eller andre antændelseskilder. Må ikke punktere eller brænde, heller ikke efter brug. Beskyt mod sollys. Må ikke udsættes for temperaturer over 50 °C / 122 °F. Bortskaffelse i henhold til myndighedernes forskrifter.

UFI-kode: GX3X-CJQK-E00M-A06E

– blanding af organiske kulstofkilder for at reducere nitrat og fosfat
– inklusive doseringsforanstaltning for nem brug
– forbedrer koralvækst
– forbedrer polyppernes forlængelse og farve
– forhindrer uønsket algevækst ved næringsstofkontrol.

Dosering:
– 2 ml NO3-reduktion pr. 100 liter akvarievand , pr. dag

NO3-redukt indeholder organiske forbindelser, der tjener bakterier som en ekstra kulstofkilde og dermed stimulerer større reproduktion. Disse bakterier bruges af koraller som føde eller skummes af. Tidligere optagne næringsstoffer forsvinder med dem, så indholdet af nitrat og fosfat i vandet gradvist falder. Korallerne bruger bakterierne som ekstra føde, der fører til en forbedring i farve og polypforlængelse.

UFI-kode: 8800-P0U7-400A-TFF3

The setting of functions is intuitive and the temperature reading is accurate, resolution 0,1°C/1°F. The setting range is 5°C – 30°C (41°F – 86°F) and the temperature is kept constant with a maximum differential of 0,5 °C/0,5 °F. Displayed temperatures are in ° C or ° F and there are security alarms.

Bestillingsvare! Leveringstid  1-2 uger!

The setting of functions is intuitive and the temperature reading is accurate, resolution 0,1°C/1°F. The setting range is 5°C – 30°C (41°F – 86°F) and the temperature is kept constant with a maximum differential of 0,5 °C/0,5 °F. Displayed temperatures are in ° C or ° F and there are security alarms.

Bestillingsvare! Leveringstid  1-2 uger!

The setting of functions is intuitive and the temperature reading is accurate, resolution 0,1°C/1°F. The setting range is 5°C – 30°C (41°F – 86°F) and the temperature is kept constant with a maximum differential of 0,5 °C/0,5 °F. Displayed temperatures are in ° C or ° F and there are security alarms.

Bestillingsvare! Leveringstid  1-2 uger!

The setting of functions is intuitive and the temperature reading is accurate, resolution 0,1°C/1°F. The setting range is 5°C – 30°C (41°F – 86°F) and the temperature is kept constant with a maximum differential of 0,5 °C/0,5 °F. Displayed temperatures are in ° C or ° F and there are security alarms.

Bestillingsvare! Leveringstid  1-2 uger!

For the control of algal growth

Phosphate and silicate remover for freshwater and saltwater aquaria.

antiphos Fe is an ideal medium for selectively extracting phosphate and silicate from aquarium water, thus counteracting unwanted algal growth. antiphos Fe is a highly active iron based product containing no aluminium and is completely non toxic to aquarium plants and animals. antiphos Fe is also the ideal substrate for reducing the phosphate content in coral reef aquaria. The binding capacity of antiphos Fe is app. 10 g phosphate/kg. Subject to the conditions, 500 ml of antiphos Fe will treat a normally populated 300 l aquarium for app. 3 – 6 months.

Fosfat- og silikatfjerner til ferskvands- og saltvands akvarier. antiphos Fe er et ideelt medium til selektivt ekstraktion af fosfat og silicat fra akvariumvand, hvilket modvirker uønsket algalvækst. antiphos Fe er et yderst aktivt jernbaseret produkt uden aluminium og er fuldstændig ikke giftigt for akvarieplanter og dyr. Bindekapaciteten af antiphos Fe er app. 10 g phosphat / kg. Under forbehold af betingelserne vil 500 ml antiphos Fe behandle et normalt befolket 300 l akvarium til ca. 3 – 6 måneder.

Dykbart digitalt termometer inkl. gummisuger og batteri.

SP 3000 er en slange til at pumpe små mængder vand. Den kan bruges til bypass-filtre, såsom Nitratdiver og Calcium Reactor, for at opsætte fordampet vand, når det kombineres med en vandstand og til automatisk dosering af gødninger og mineraler. I ferskvands akvarier kan jerngødningen fermentale tilsættes dagligt. Pumpen leveres med en langvarig Santoprene® slange.

SP 3000 : 3,0 l / time (ca. 0,08 gph), 4,5 watt

Den SP 3000 Niveaumat automatisk top op fordampet vand i ferskvand og saltvand akvarier. Den omfatter en Niveaumat SP 3000 peristaltisk pumpe med en direkte tilsluttet flydeafbryder. Float-kontakten er installeret i akvariet eller filtertanken på det ønskede niveau ved hjælp af holderen. Da niveauet falder, toppes Niveaumat SP 3000 automatisk op i tanken med vand fra et reservoir (medfølger ikke). 
Tekniske data Niveaumat : Kapacitet: 3l / h Pumpe, slange: Santoprene®, strømforbrug: 4,5 watt

Dimensioner: app. 305 x 305 x 10 mm, gitterstørrelse: 13 x 13 mm

Den refraktometer er et præcisions optisk instrument, der anvendes til at bestemme saltkoncentrationen i saltvand akvarier. Dens nøjagtige værdi kan bestemmes i sekunder og kan læses enten som absolut saltkoncentration (‰, ppt) eller som specifik densitet. Når en lysstråle kommer ind i refraktometeret, bøjes den eller “brydes” af vandet i testpanelet. Denne brydning er proportional med prøveens saltholdighed og kan læses direkte ved at se den interne skala. Da saltholdigheden varierer i omvendt forhold til temperaturen, er refraktometeret fuldt temperaturkompenseret. Den stærke plastik taske indeholder refraktometeret , en pipette til vandprøven, en skruetrækker til kalibrering og fulde instruktioner.

Mulighed: 60 ml testvæske 35 ppt

almindelig er forkromet og tilbyder: et fast arbejdstryk på ca. 1,5 bar, en nåleventil til finjustering, to trykmålere, der viser både cylinder og arbejdstryk. Normalt passer industristandard CO ₂cylindre med en ekstern ventil.

Genopfyldningssystem med sikkerhedskreds

Nem og sikker genopfyldning af fordampet vand i akvariet

– Permanent overvågning af vandstanden i akvariet med infrarød sensor inkl. forsinkelseskredsløb.
– Automatisk genopfyldning af fordampet akvariumvand.
– Justerbare minimums- og maksimumsvandniveauer i akvariet eller filterpakken.
– Tørløbs beskyttelse af genopfyldningspumpen – Optisk og akustisk alarm.
– Der er en advarsel om påfyldningsbeholderens lave vandniveau.
– Nem installation og vedligeholdelse, stikforbindelser på alle kabler (inkl. Kabelbeskyttelse mod utilsigtet udløsning).
– Sikkerhed afbrydelse kredsløb i tilfælde af en defekt niveau sensor.
– 12 V lavspænding, inkl. transformer 100 – 240 V / 50 – 60 Hz.

– Opløser let og efterlader ingen rester, så det kan hurtigt bruges.

Indhold: 20 kg

OBS: Er ikke almindelig lager vare.

Improved dirt removal for cleaner water and darker rolls
Reduced effect on skimmer foam when first changing a new roll
Improved water resistance of centre disposable core
40m roll length – 60% longer than the original 25m rolls
Made in Europe
100% recyclable polypropylene

Do you know that on each Clarisea XL roll there is the equivalent surface area of the following number of standard filter socks.

SK3000 XL – 75 x 4″ Filter Socks

SK5000 XL – 115 x 4″ Filter socks

Cost Savings
Think how often you need to change your filter socks!

Do you wash them or change them, if so what is your time worth every 3-4 days?

Incredible but true, compare the cost of both options to yourself and you will realise why the ClariSea Fleece Filter is so popular.

It is not really correct to state a micron size for this type of filter material as it can lead to confusion.

Like all fleece filters of this type, including bag filters, the size of the particle removed by the media will continuously reduce as the fleece dirties.

Example; with a 200 micron filter sock, the largest particle that should pass through when new is 200 microns, however as the media starts to collect dirt, the holes get blocked creating smaller and smaller passages and so the bag collects out smaller and smaller particles. It continues to do this until the head pressure can no longer force water through the small holes and it overflows.

The ClariSea works in exactly the same way except that instead of overflowing and having to change or clean the bag, it automatically rolls on to expose a fresh piece of material. The fresh fleece will allow larger particles to pass through and the dirtier material will stop smaller particles.

The higher the flow rate through the fleece, the less time the roll will last.

Imagine it as a large group of people trying to leave a building through one door. The slower and more organised they try to leave, the easier it is for individuals to bunch together and to fill into small gaps in the crowd, like water and small particles finding their way through small holes in the fleece.

Compare this with people trying to leave quickly in a panic, and chaos is created, so that people back up around the door, like the water level backing up and triggering the float to move on the roll in the ClariSea without it becoming fully saturated with dirt.

The pressure to force such a large flow rate of water through such a fine fleece is created by the head height of the water in the ClariSea unit above the water level in the sump.

The higher this difference is between the two levels, the higher the head pressure, and the easier it is to force the same amount of water through smaller and smaller holes created as the fleece blocks. The perfect height would therefore be with the opening to the silencing plates being about 1-2 cm (1/2-1″) below the water surface. (On the tests for the ‘flow vs filter life’ chart, the bottom of the ClariSea was submerged 11cm below the surface).

The deeper the Clarisea sits in the water, the less head pressure exists to force water through the fleece and therefore the shorter the life of the roll.

Factors affecting the life of the fleece are/

1 – Water flow (volume)

2 – Filter installation height above the water.

3 – Dirty tank.

With most aquariums you will find that they act as large settlement chambers and that particles of food, detritus and dead bacteria settle within the sand or substrate. The clarisea will remove this detritus from the water before it gets a chance to settle but will also remove sediments from the substrate as it is stirred up by fish or manually.

The rolls in the early days may last for a shorter length of time and should be seen to last longer and longer as the tank is cleaned.

4 – Greedy fish

Tanks with high stocking loads of hungry fish will dirty the roll faster but keep your aquarium sparklingly clean whilst removing uneaten food before it breaks down.

5 – Excessive Carbon Dosing

Carbon dosing works by growing bacteria in the water column that are then exported out of the system by skimming or filtration. Excessive carbon dosing can result in bacterial blooms which are seen as a slight cloudiness of the water. The ClariSea fleece is fine enough to remove these bacteria from the water but when in high volumes will blind the fleece and reduce it’s life. If you notice this then we suggest slowly reducing the amount of carbon source added. Equally the installation of the ClariSea after a Nitrate Filter will also reduce the life and give a pale coloured roll from the white bacteria.

Improved dirt removal for cleaner water and darker rolls
Reduced effect on skimmer foam when first changing a new roll
Improved water resistance of centre disposable core
40m roll length – 60% longer than the original 25m rolls
Made in Europe
100% recyclable polypropylene

Do you know that on each Clarisea XL roll there is the equivalent surface area of the following number of standard filter socks.

SK3000 XL – 75 x 4″ Filter Socks

SK5000 XL – 115 x 4″ Filter socks

Cost Savings
Think how often you need to change your filter socks!

Do you wash them or change them, if so what is your time worth every 3-4 days?

Incredible but true, compare the cost of both options to yourself and you will realise why the ClariSea Fleece Filter is so popular.

It is not really correct to state a micron size for this type of filter material as it can lead to confusion.

Like all fleece filters of this type, including bag filters, the size of the particle removed by the media will continuously reduce as the fleece dirties.

Example; with a 200 micron filter sock, the largest particle that should pass through when new is 200 microns, however as the media starts to collect dirt, the holes get blocked creating smaller and smaller passages and so the bag collects out smaller and smaller particles. It continues to do this until the head pressure can no longer force water through the small holes and it overflows.

The ClariSea works in exactly the same way except that instead of overflowing and having to change or clean the bag, it automatically rolls on to expose a fresh piece of material. The fresh fleece will allow larger particles to pass through and the dirtier material will stop smaller particles.

The higher the flow rate through the fleece, the less time the roll will last.

Imagine it as a large group of people trying to leave a building through one door. The slower and more organised they try to leave, the easier it is for individuals to bunch together and to fill into small gaps in the crowd, like water and small particles finding their way through small holes in the fleece.

Compare this with people trying to leave quickly in a panic, and chaos is created, so that people back up around the door, like the water level backing up and triggering the float to move on the roll in the ClariSea without it becoming fully saturated with dirt.

The pressure to force such a large flow rate of water through such a fine fleece is created by the head height of the water in the ClariSea unit above the water level in the sump.

The higher this difference is between the two levels, the higher the head pressure, and the easier it is to force the same amount of water through smaller and smaller holes created as the fleece blocks. The perfect height would therefore be with the opening to the silencing plates being about 1-2 cm (1/2-1″) below the water surface. (On the tests for the ‘flow vs filter life’ chart, the bottom of the ClariSea was submerged 11cm below the surface).

The deeper the Clarisea sits in the water, the less head pressure exists to force water through the fleece and therefore the shorter the life of the roll.

Factors affecting the life of the fleece are/

1 – Water flow (volume)

2 – Filter installation height above the water.

3 – Dirty tank.

With most aquariums you will find that they act as large settlement chambers and that particles of food, detritus and dead bacteria settle within the sand or substrate. The clarisea will remove this detritus from the water before it gets a chance to settle but will also remove sediments from the substrate as it is stirred up by fish or manually.

The rolls in the early days may last for a shorter length of time and should be seen to last longer and longer as the tank is cleaned.

4 – Greedy fish

Tanks with high stocking loads of hungry fish will dirty the roll faster but keep your aquarium sparklingly clean whilst removing uneaten food before it breaks down.

5 – Excessive Carbon Dosing

Carbon dosing works by growing bacteria in the water column that are then exported out of the system by skimming or filtration. Excessive carbon dosing can result in bacterial blooms which are seen as a slight cloudiness of the water. The ClariSea fleece is fine enough to remove these bacteria from the water but when in high volumes will blind the fleece and reduce it’s life. If you notice this then we suggest slowly reducing the amount of carbon source added. Equally the installation of the ClariSea after a Nitrate Filter will also reduce the life and give a pale coloured roll from the white bacteria.

Nem og sikker genopfyldning af fordampet vand i akvariet

– Permanent overvågning af vandstanden i akvariet med en infrarød sensor inkl. forsinkelseskredsløb
– Automatisk påfyldning af fordampet akvarievand
– Tørløbsbeskyttelse af påfyldningspumpen
– Nem installation og vedligeholdelse, stikforbindelser på alle kabler
– Føler med magnetholder
– 12 V lavspænding, inkl. transformer 100 – 240 V / 50 – 60 Hz

– Opløser let og efterlader ingen rester, så det kan hurtigt bruges.

Indhold: 10 kg

4-kanals doseringspumpe inkl. ekstern controller

Aqua Medic reefdoser EVO 4 kan uafhængigt styre de fire doseringspumper, der er inkluderet i pakken. Afgivelsen af ​​fødevaren eller additivet kan opnås enten manuelt eller automatisk; Alle pumper kan kalibreres individuelt. Intervalkontrol gør det muligt at justere varigheden af ​​tænd / sluk-cyklen for hver pumpe over et bredt tidsrum – fra sekunder til dage. reefdoser EVO 4 kan automatisere mange opgaver i et akvarium:
– regelmæssig udlevering af sporstoffer og gødninger i salt- og ferskvandsakvarium?
– kontrolleret tilsætning af calcium og bicarbonat til koralrev akvarier?
– Korrekt dosering af Kalkwasser?
– Automatisk fodring med live zoo plankton?
– Den eksterne controller kan placeres i en position væk fra pumperne for at gøre det nemt at bruge og tillade det? meget enkel programmering.

Udvideligt til otte doseringspumper med reefdoser add 4
Dimensioner reefdoser EVO 4 : app. 25 x 13 x 6,4 cm (lxwxh)
Dimensioner controller: ca. 14 x 6,5 x 3,6 cm (lxwxh)
inkl. 4 m indløbsslange (kan indstilles individuelt) for at forbinde doseringspumperne til beholderne med doseringsvæskerne.